I would like the dimensions for the BP-EVB3090FE

Question

Hello,

I am installing the BP-EVB3090FE rear memory block together with the BP-VG3090FE-V2 waterblock for the NVIDIA RTX 3090 Founders Edition.

I have the waterblock but do not have the correct backplate, so I need to modify my existing backplate to clear the EVB block. To do this safely, I require the exact mechanical dimensions of the BP-EVB3090FE and its positioning relative to the FE PCB mounting holes.

Can you please provide the following:
    1.    Full mechanical drawing (DXF, PDF, or engineering sketch) of the
BP-EVB3090FE, including:
    •    Overall length × width (mm)
    •    Mounting hole spacing and coordinates
    •    Height profile
    •    Any keep-out zones
    •    Dimensional center reference for alignment to PCB hole pattern
    2.    Mounting hole coordinate map for the BP-EVB3090FE referenced to the
standard RTX 3090 FE PCB (PG136).
    3.    Recommended backplate cutout dimensions when combining:
    •    BP-EVB3090FE
    •    BP-VG3090FE-V2
    •    Any official cut template or machining tolerance notes
    4.    If available, a 3D STEP file or 2D CAD DXF of the block outline or
backplate cutout shape.

This information is necessary to avoid interference when fitting the EVB block beneath the VG3090FE-V2 backplate.

Thank you,
Miles Cornwall

Answer 1

Hello Miles,

Thank you for contacting Bitspower.
Since you already have the back plate of BP-VG3090FE-V2 water block.
We will send the cutout dimensions to you by email.
This is the information we can offer.
If you have any questions, feel free to contact us.

Comments

Thanks! One more thing: what size and type are the 4 screws used to secure the back water block through the PCB and into the front water block on the BP-EVB3090FE?