CR120 Horizontal

Question

Hi,

Can the CR120 operate horizontally with the pump facing up? For example, if I mount it on the empty bottom intake fan slot in my case.

Regards,
Rakha

Answer 1

Dear Rakha,

No, the CR120 cannot operate horizontally with the pump facing upward.
In this position, water cannot fully enter the pump, which may cause the pump to fail.

However, the CR120 can operate horizontally with the pump facing down.
You can use the brackets that come with the reservoir.
Please download and refer to the installation guide.

If you have any questions, feel free to contact us.

https://shop.bitspower.com/index.php?route=product/product&product_id=8729&search=CR120

Comments

Thank you for your response!

Would you mind clarifying which side of the pump is considered to be facing up? From my understanding as a beginner to watercooling, the side of the pump I consider as face-up is the very first image on the CR120 product page, the side with the displayed stop-fitting that has the Bitspower logo.

Answer 2

Informative question. I just did my SASSA status check https://yoursassastatus.co.za/
 and it’s still showing pending, hoping for an update soon.