How am I supposed to keep the reservoir on the Titan 1.2x kit from sliding down from the radiator and leaking?

Question

There don't appear to be any screw holes on the case that line up properly with the reservoir when the tubes are attached to the radiator at the top of the case, so there's nothing to hold it up. The reservoir immediately slides down off the tubes and detaches completely from the radiator.

Answer 1

Hello Christopher,

The tubing from the reservoir to the radiator is holding by the 90 degree angle fittings.  It is the small straight tubing. Only one reason to happen leaking is the tubing and fitting doesn't connect tightly. Would you send the photos to following email address? We will check and confirm, thank you.
[email protected]